Madrigal Imaging Dual Monaural Power Amplifier User Manual download pdf (Page 18)

Specifications

The correlation between published specifications and sonic quality is

unreliable. A list of numbers reveals virtually nothing. All technical

measurements must be subject to qualitative as well as quantitative

interpretation.

Measurements of the Nº29 yield excellent results by any standards.

However, only those specifications that apply to the actual operation

of the amplifier are included here.

■ Rated power: 50W minimum continuous sine wave power into 8Ω,

with both channels driven from 20Hz to 20KHz with no more than

0.1% THD (FTC). 100W minimum continuous sine wave power into 4Ω

with both channels driven from 20Hz to 20KHz with no more than

0.2% THD (FTC).

■ Peak output voltage: 30 volts @ rated line voltage @ 8Ω

■ Frequency response: (-3dB) 4Hz, 122KHz

■ Input impedance: 50KΩ shunted by 1.5nF

■ Voltage gain: 26dB

■ Power consumption: Typically 100W @ idle, 200W @ rated power, 8Ω

■ Overall dimensions: See "Dimensions"

■ Shipping weight: 39.25 lbs. (17.8kg)

■ Connector complement: Two RCA-type connectors

Two XLR-type connectors

Eight five-way binding posts

One IEC mains connector

For more information, see your Mark Levinson dealer, or contact:

Madrigal Audio Laboratories, Inc.

2081 South Main Street (Route 17), P.O. Box 781

Middletown, Connecticut 06457 USA

Telephone (203) 346-0896

(FAX (203) 346-1540

If purchased in North America, this Mark Levinson product’s warranty is owner-transferable.

Warranty conditions are valid only in the country where the product was originally purchased.

For warranty information and conditions on products purchased outside of North America,

contact your local dealer or regional distributor.

1 2 ... 13 14 15 16 17 18 19 20

No comments

Madrigal Imaging Dual Monaural Power Amplifier User Manual Page 18