Madrigal Imaging MP-8 User Manual download pdf (Page 82)

Channel List ➤ The Channel List utility allows you to display and program the projector’s

Channel List. The Channel List is a user-programmable list of sources and

projector setups. Sources added to the list can be quickly switched to and

displayed by entering their assigned two-digit channel number. Channels

may also be selected using the keypad’s up and down arrow keys. Channel

selection is described in section 3.3, Source Selection.

To display and/or program the Channel List, press from the Utilities

menu. The initial display shows the first ten channels in the list. Up to

99 channels can be displayed. For each channel a name, input number

(switcher and slot number), Recall memory number, and up/down list may

be programmed.

Program a channel as follows:

When the Channel List is

first displayed, the cursor is

positioned in the channel

number column. While in

the channel number column,

press or to highlight

the channel you want.

Alternatively, you can highlight

the channel you want by

entering the channel number

on the keypad. Entering the

channel number also allows

you to select/display/edit

channels beyond the first ten.

Next, press to move the cursor to the Name field. While

in the Name column, and change the character at the

cursor position and move the position of the cursor. Once

a source name has been entered, move the cursor to the Input

field by pressing or by using . Edit the Input, Recall,

and Up/Down (U/D) fields. See below for field definitions.

To exit the channel list, press or .

Note: When the cursor is positioned on a edit field, the field may

be cleared by pressing .

NOTE: If a channel is selected and ASR is on for the same input, and the

incoming frequency does not match the selected setup memories frequency,

it may cause the following: ASR may be triggered, the setup memory may

change and the channel number may be changed to reflect the new memory.

Example: If Channel 4 shows input (1,3) and no recall number and input

(1,3) switcher 1 slot 3 is selected and recall memory 55 is currently selected

then the Source Message box will show that Channel 4 is selected unless

there is another channel with input (1,3) and recall 55.

space

EXIT

RECALL

ENTER

OPERATION

3.40

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 137 138

Comments to this Manuals

No comments

Madrigal Imaging MP-8 User Manual Page 82

Comments to this Manuals

Related products and manuals for Projectors Madrigal Imaging MP-8