Madrigal Imaging MP-8 User Manual download pdf (Page 57)

There are two types of setup memories:

Input and Recall. Both memory types store

the same parameters. The only difference is

that Input memories store display settings

for a particular physical input (e.g., switcher

0, slot 1) while Recall memories can be used

with any input.

At any one time, one setup memory is the

current setup memory. The display settings

in the current setup memory are used for

the current display. When a source is

selected by entering its input number, the

Input memory for the selected input

becomes the current setup memory (unless

ASR is on and is triggered). If a Recall

memory is selected, it becomes the current

setup memory. Display adjustments are

automatically saved in the setup memory

which is current at the time of adjustment

(unless the setup memory is locked –

explained later).

Input Memories ➤ As mentioned above, Input memories store

display settings for each physical input (i.e.,

switcher 0, slot 1). When an input becomes

the current setup memory, its display

settings are used (unless ASR is on and is

triggered). If the input is being selected for

the first time, a new Input memory is created.

Recall Memories ➤ Recall memories provide an alternative to using the display settings stored in

the Input memory of the selected source. For example, you may want to

temporarily disconnect a computer connected to the projector’s RGB input

and in its place, connect another computer with different signal characteris-

tics. Since the connection is only temporary you don’t want to change the

display settings stored in the Input memory. Instead, you can select a Recall

memory which has the settings you want for the new input.

If there are many devices which will be sharing the same input, many Recall

memories can be created to store the display settings for each. On the other

hand, if there are many sources on different inputs with exactly the same

signal characteristics, it may be possible for them to share the same Recall

memory.

Recall memories are identified by a two digit number. Any number from

01 to 99 can be assigned, although only 75 memory spaces exist.

OPERATION

3.15

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 137 138

Comments to this Manuals

No comments

Madrigal Imaging MP-8 User Manual Page 57

Comments to this Manuals

Related products and manuals for Projectors Madrigal Imaging MP-8